For example, in gear three while in hammer mode you'll have 38,250 blows per minute while the chuck spins at 2,250rpm. There's also a newly improved, 3-stage, bae-mounted LED worklight. It has a maximum brightness of 60 lumens, enough to light up a huge work area and even bright enough to use solely as a torch. There's a sturdy switch built-in to the drill base to control the brightness. 1 X DCD996N Body Only.
Soft Application Max Torque (Nm): 66. Hard Application Max Torque (Nm): 95. Torque Settings: 11 + Drill. LED Job Light: Yes / Delay / Base-mounted. Battery Compatibility: 18v Lithium-Ion (XR).
Variable Speed Control Trigger: Yes. No Load Speed (RPM) High: 0-2250.No Load Speed (RPM) Med: 0-1500. No Load Speed (RPM) Low: 0-500. Chuck Type: 3-Jaw / Single Sleeve Keyless / All Metal. Chuck Capacity (mm): 1.5-13.0. Drill Capacity: Concrete (mm): 13. Drill Capacity: Metal (mm): 15. Drill Capacity: Wood (mm): 55. Impact Rate (BPM) High: 0-38250.
Impact Rate (BPM) Med: 0-25500. Impact Rate (BPM) Low: 0-8600. Kg with 1.5/2Ah Batt: 2. Kg with 3/4/5Ah Batt: 2.2. Sound Pressure Level (LpA): 97 dB (A).Sound Power Level (LWA): 108 dB (A). Sound Uncertainty (K): 3 dB (A). Drilling Concrete Vibration Emission (ah): 15 m/s². Drilling Concrete Vibration Uncertainty (K): 3.9 m/s². Drilling Metal Vibration Emission (ah): 2.5 m/s².
Drilling Metal Vibration Uncertainty (K): 1.5 m/s². Images for illustrative purposes only - please refer to description and specification for full details of product. All metal nitro-carburised chuck prolongs life as it is stronger and rust resistant.Carbide inserts improve bit gripping strength and helps to minimise dropped bit frustrations. 3 speed gearbox for a greater range of applications.
Larger brushless motor than previous model gives up to 34% increase in power. Improved air flow to the motor keeps it cool under pressure. Hammer Function increases speed to 2250rpm giving increased productivity.Super bright base-mounted LED worklight with 3 LEDs which give a range from 2.6 to a massive 60 lumensr. We can deliver to an address other than the billing address, but please note that extra documentation may be needed to comply with such orders. You will become the owner of goods you have ordered when they have been paid for and delivered to you. All prices are inclusive of VAT (where applicable) at the current rates and are correct at the time of entering the information onto the system. Prices are in Pounds Sterling unless otherwise specified. If you are not happy to proceed, or we are unable to obtain your instructions, we will cancel the order. Unless we have already dispatched or commenced performance of your order, we will not be obliged to supply products or provide services at the incorrect price or based on an incorrect description. When you pay for your order by credit or debit card, we carry out checks or'authorisations' with the card issuer for security reasons. Should any problems occur with the authorisation of your card, we will contact you with further details. We will send you a return code and return address. This does not affect your statutory rights. Makita DHP486Z 18V Brushless Combi Drill Bare Unit (Replaces DHP481Z). Makita DHP486Z 18V Brushless Combi Drill With 831279-0 LXT600 Tool Bag. Makita DHP486Z 18V Brushless Combi Drill With 1 x 5Ah Battery, Charger.
Makita DHP486Z 18V Brushless Combi Drill With 2 x 5.0Ah Batteries, Charger. This listing is currently undergoing maintenance, we apologise for any inconvenience caused. This item is in the category "Home, Furniture & DIY\DIY Tools & Workshop Equipment\Power Tools\Cordless Drills".
The seller is "ukplanettools" and is located in this country: GB. This item can be shipped to United Kingdom.